Filter
Top Products
When you can’t reach someone: continued
22
Ring again
When you receive a busy signal when calling someone, Ring Again can
signal you when their telephone becomes free. You can then use Ring
Again to automatically redial the number. Note that you can only have
one Ring Again request at a time.
To use Ring Again:
1. Make a call.
2. If the line is busy, press
s.
3. Press
r to release the call. When the telephone you called
becomes free, you hear a Confirmation tone from the speaker and
the Ring Again indicator flashes.
4. Lift the handset or press
Y.
5. Press
s to automatically redial the number. If you do not
press
s within a pre-defined time limit (between 8–32
seconds), the Ring Again request is cancelled automatically.
6. If you have only one line and are already on a call when the Ring
Again indicator flashes, you must complete the call before the
pre-defined time limit and press
s to redial the previously
busy number.
If you have two lines and are already on another call when the Ring
Again indicator flashes, press
a to put the current call on
hold. Press the free line key and then press
s to redial
the number.
To cancel a Ring Again request:
1. Press s before you hear the Ring Again Confirmation tone.
6310 E UG2.qxd 1/24/05 3:49 PM Page 22