Filter
Top Products
13
Setting up local features: continued
Display Language
To select the language used to show information on the display:
1. Press b.
2. Press
@ until Language? is shown on the display.
3. Press
a.
4. Press
@ until the desired language is shown on the display.
5. Press
a to save the new setting.
6. Press
b or r to exit programming mode.
C.O.(Network) Features
The M6310 allows you to replace the Save Number, Memory Number,
and Pause local features with additional Central Office C.O. (Network)
Features. When instructed to do so by your System Administrator or
Customer Service Representative, use the following instructions to
enable or disable Central Office C.O. (Network) Features. When
enabled, the additional features will be located on the feature keys
normally pressed to use Save Number, Memory Number, and Pause.
To enable/disable C.O. (Network) Features in place of the Save, Memory, and
Pause keys:
1. Press b.
2. Press
@ until C.O.Features? is shown on the display.
3. Press
a.
4. Press
@ until the desired setting is shown.
5. Press
a to save the new setting.
6. Press
b or r to exit programming mode.
Note: If your phone has network features programmed on Feature Keys
7, 8 & 9 please ensure that C.O.
Features
is ENABLED.
6310 E UG2.qxd 1/24/05 3:49 PM Page 13