Filter
Top Products
14
The basics: continued
Predial
The Predial feature allows you to dial your number first, inspect it as it is
shown on the display, and then pickup the handset or press
Y to
make your call.
To enable/disable the Predial feature:
1. Press b.
2. Press
@ until Predial? is shown on the display.
3. Press
a.
4. Press
@ to enable or disable the Predial feature.
5. Press
a to save the new setting.
6. Press
b or r to exit programming mode.
To make a call when Predial has been enabled:
1. Dial the telephone number — the number is shown on the display.
2. Pickup the handset or press
Y. The M6310 selects the PDN
line and makes the call. Note that you can edit the Predial number
by using the
@ key and the dialpad digits.
Save Number
The Save Number feature allows you to save the telephone number you
are calling so that you can redial the number quickly the next time you
call.
To save the number for the current call:
1. Before you end the current call, press c.
When the number has been saved,
Saved is displayed on the top
line of the display for 3 seconds.
To make a call using the number you saved:
1. Press c.
2. Pickup the handset or press
Y.
The previously saved number is dialed automatically. Note that the
number remains unchanged until you save another number.
6310 E UG2.qxd 1/24/05 3:49 PM Page 14