Filter
Top Products
2 Model 6757i IP Phone User Guide
Welcome
• Built-in-two-port, 10/100/1000 Ethernet switch - lets you share a connection with your
computer.
• Inline power support (based on 802.3af standard) which eliminates power adapters.
• AC power adapter (included)
• Enhanced busy lamp fields*
• Set paging*
* Availability of feature dependant on your phone system or service provider.
Requirements
The 6757i IP Phone requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP account created for
the 6757i phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets
Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps)
recommended)
• Category 5/5e straight through cabling (category 6 straight through cabling required for
optimum Gigabit Ethernet performance)
•Power source
For Ethernet networks that supply in-line power to the phone (IEEE 802.3af):
— For power, use the Ethernet cable (supplied) to connect from the phone directly to the
network for power. (No 48v AC power adapter required.)
For Ethernet networks that DO NOT supply power to the phone:
— For power, use the 48V AC Power Adapter (included) to connect from the DC power
port on the phone to a power source.
or
— (optional) For power, use a Power over Ethernet (PoE) power injector or a PoE switch.
A PoE power injector is available as an optional accessory from Aastra Telecom.
Contact your Administrator for more information.
Installation and Setup
If your System Administrator has not already setup your 6757i phone, please refer to the Aastra
6757i Installation Guide for basic installation and physical setup information. For more
advanced administration and configuration information, System Administrators should refer to
the Aastra Models 9000i and 6700i Series SIP IP Phones Administrator Guide.