Filter
Top Products
Model 6757i IP Phone User Guide 213
Additional Features
Call Waiting Tone Period
You can specify a specific time period (in seconds) for the call waiting tone to play at regular
intervals on an active call using the parameter “Call Waiting Tone Period”. A value of “0” is the
default and plays the call waiting tone only once on the active call. When the incoming caller
hangs up, the call waiting tone stops on the existing active call.
You can enable or disable this feature in the Aastra Web UI.
Configuring “Call Waiting Tone Period”
Use the following procedure to configure “Call Waiting Tone Period”.
1. Click on Basic Settings->Preferences->General.
2. In the "Call Waiting Tone Period" field, enter a time period, in seconds, that the call waiting
tone will be audible on an active call when another call comes in. Default is 0 seconds.
3. When enabled, the call waiting tone plays at regular intervals for the amount of time set for
this parameter. For example, if set to “30” the call waiting tone plays every 30 seconds. When
set to “0”, the call waiting tone is audible only once on the active call.
4. Click Save Settings.
Aastra Web UI