Filter
Top Products
Model 57i CT IP Phone User Guide 170
Accessing Options on the Handset
Status Messages
Multifunction Handset LED Indicator
The multifunction Handset LED provides the following user feedback:
• Flash: Message Waiting Indicator – Slow
• Flash: Alerting – Rapid
• Flash: Mute – intermittent
• Flash: Hold – Intermediate
• Solid: On an active call
Handset Keys
Softkeys (
{
or
}
)
Your 57i CT cordless handset has two softkeys directly under the LCD display. The
softkey menus change depending on the phone’s state, displaying relevant softkeys
only. These softkeys are pre-programmed for the call handling and extension
management features.
Talk /Hold
v
Key
The Talk/Hold key v
is a multi-purpose key with the following uses:
• To initiate a call by seizing the line or through pre-dial.
• To answer a call during ringing.
• To place a call on hold during an active call.
Hold
v
Key
• Press the hold key v
while on a call to place the call on hold. While a call is
on hold, and if there are no other active calls, the LED flashes at the hold rate
and the display presents the Call is on Hold prompt. In addition, a held call
reminder tone is played in the form of a short ring burst (flash ring).
Release Key (
y
)
The release key is a multi-purpose key with the following uses:
• To end a call.
Display
Message
Description
Microphone mute Indicates when the Mute button has been Activated
Out of range Appears briefly when pressing a key if out of range of the
base station
Note: The handset is equipped with an auto-hold feature. While on an active
call, pressing any other line key results in the current line being placed
on hold and the new line being seized.
Note: You can also place the handset in the charger cradle to end the call.