Filter
Top Products
72 Model 57i CT IP Phone User Guide
Line Keys and Softkeys
Setting a BLF List Key
The BLF List functions can be configured on the 57i CT using the Aastra Web UI
only.
If you set a softkey to use BLF/List, you must also enter a BLF List URI at
Operation->Softkeys and XML->Services. The BLF List URI is the name of the
BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your
particular user. For example, my480i-blf-list@as.broadworks.com. The value of the
BLF\List URI parameter must match the list name configured. Otherwise, no values
display on the 57i CT screen and the feature is disabled.
Use the following procedure to set a key to function as "BLF List".
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
2. Click on the Bottom Keys tab or the Top Keys tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select "BLF\List" (BroadSoft BroadWorks).
5. In the "Line" field, select a line number that is actively registered to the appropri-
ate SIP proxy you are using.
Aastra Web UI
Note: The "Label" and "Value" field are not required. The BroadWorks BLF
List name is configured in the "BLF List URI" field instead.