Filter
Top Products
Model 57i CT IP Phone User Guide 107
Line Keys and Softkeys
None Key
You can set a key to force a blank entry on the IP phone display for a specific key.
You do this by setting the key to "none". The keys are added in order (from key 1 to
key 20) after any hard-coded keys have been added. If a particular key is not defined,
it is ignored. For more infomration about key behavior, see "Key Display Behavior"
on page 58.
Setting a None Key
Use the following procedure to configure a None key on the 57i CT IP Phone.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>..
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select None.
5. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
6. Click to save your changes.
Aastra Web UI