Filter
Top Products
167 Model 57i CT IP Phone User Guide
Accessing Options on the Handset
Feature Keys on the Handset
You can program up to 15 feature keys on the 57i CT handset with specific functions
using the Aastra Web UI. The following table identifies the functions available for all
15 handset keys and the default functions for each key.
Feature Key Programming Guidelines
The following are guidelines to use when programming the feature keys on the
handset:
• All handsets paired with the same Base Station have the same programmed
functions since the web interface applies the functions to all the handsets
paired with that base.
• A newly registered handset or handset that was out-of-range during the pro-
gramming needs to perform an "off-hook and on-hook" sequence in order for
the newly programmed function to be broadcast to the affected handsets.
Simply press the v key from the idle state to go off-hook. Then, press the
y key to go back on-hook.
• Duplicate functions can exist in the feature key as there is no filtering or
duplicate checking done on the handset or the base.
• If no line keys are programmed for the feature key, the handset is restricted to
intercom calls only.
Key
Function
Description Default for:
Line 1 Line 1 key - Selects line one Handset Key 1
Line 2 Line 2 key - Selects line two Handset Key 2
Line 3 Line 3 key - Selects line three Handset Key 3
Line 4 Line 4 key - Selects line four Handset Key 4
Icom Intercom key – Enter handset list to select
handset to call
Handset Key 5
Dir Directory key – Activate directory feature Handset Key 6
Callers Callers key – Activate callers feature Handset Key 7
Xfer Transfer key - Activate transfer feature Handset Key 8
Conf Conference key - Activate conference feature Handset Key 9
Public Public key – Toggle between public & private
call mode
Handset Key 10
None No function is selected – this key is empty, no
label.
Handset Key 11 and
12
Line 5 Line 5 key (if available) - Selects line five. Handset Key 13
Line 6 Line 6 key (if available) - Selects line six. Handset Key 14
Line 7 Line 7key (if available) - Selects line seven. Handset Key 15
Line 8 Line 8 key (if available) - Selects line eight
Line 9 Line 9 key (if available) - Selects line nine