Filter
Top Products
38 CHAPTER 2: INSTALLATION SCRIPTS
8 Type the maximum number of simultaneous sessions. Each session
requires one system device license.
9 Click OK or Apply to save your changes.
When you click Apply, the system adds a trusted endpoint. Click SIP
Applications > Trusted SIP Interfaces to verify.
10 Configure the dial plan. You must add an extension list to the dial plan to
support routing of extensions to the conference server or edit the
extension list if one has already been created.
Dial Plan and 3Com IP Conferencing Module Configuration
You must configure the dial plan to complete the 3Com IP Conferencing
Module configuration. The following procedure describes the process.
1 See the NBX Administrator’s Guide for more information about the
details in these steps.
2 Add an extension list to the dial plan to support routing of extensions to
the 3Com IP Conferencing Module.
For example, you can define the 3Com IP Conferencing Module
extension list as follows:
3 Create a route entry in the dial plan for the dialed-in digits the telephone
user of the 3Com IP Conferencing Module enters.
For example, using the extension list created in Step 1, the entry below
shows a dial-in that begins with 900.
/ Route Description
/ ----- -----------
DestinationRoute Create 900 Conference
/ Route Entry DestinationExtension
/ ----- ----- --------------------
DestinationRouteEntry Create 9 1 *0900
/ Extension List *0900 holds the internal extension of 3Com IP Conferencing Module
/ ID Entry Digits Min Max Class PrioRoute
/ --- ----- ------ --- --- ----- ---------
Table Entry Create 1 6 900 3 3 internal0900