Filter
Top Products
18 CHAPTER 2: INSTALLATION SCRIPTS
These sections run automatically after the command “setup” is entered.
Single Server Initial
Installation
The section contains a sample script of the setup script for the single
server (all-in-one) configuration).
Sample setup Script
(All-in-one server)
The following options are selected in this sample script:
■ All-in-one system configuration (installs the conference server,
conference attendant server, web server, NBX user database, and
conference & presence database)
■ Master database configuration.
The setup script displays the current settings and then asks you if you
want to accept or update them. Sample answers are provided in bold
type along with explanations of those answers. Explanations are in italics.
To run the setup script:
1 Log in to the server as root.
2 Enter a password (default is pvadmin).
3 Press Enter (or Return).
-bash-2.05b# setup
Enter setup at the command prompt.
---------------------------------------------------------------------------
---------- Welcome to the VCX Linux Network Configuration Wizard ----------
---------------------------------------------------------------------------
This wizard sets up networking and related services.
Start of Network Configuration
Configure networking now? [yes] :
Press the Enter or Return key to accept yes as the suggested answer.
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------
VCX servers can use DHCP for automated configuration, but this requires
that the DHCP server is configured to provide the proper options. Unless
you know that your environment is set up in this way, you should say 'no'
here and configure static network parameters.
Use DHCP on eth0 to configure network parameters? [no] :