Filter
Top Products
FAQS / TROUBLESHOOTING
Why don't I hear a dial tone?
1. Make sure the headset is on (page 14)
2. Make sure headset is in Talk Time mode (you should see a headset icon
on the front, right side of the base).
3. Check all cord connections (page 10)
4. Make sure the phone’s handset is removed from the cradle or the line/headset
button has been pressed (headset ready phones only).
How long do I have to charge the headset before I can use it?
You should charge the headset for 4 consecutive hours before first use. After that,
the headset will continue to charge any time it is mounted in the base.
Can I still use my telephone features?
Yes, you can utilize your phone’s features as you normally would.
My battery seemed to last less time than expected. How do I remedy this?
If this happens, condition the battery by taking the headset off the base and putting
it into TalkTime mode (page 14). You should see the headset icon on the base.
Let the battery drain like this for 4 hours. Then place the headset back in the base
and charge again for 4 full hours. It’s not likely that you will need to do this more
than once.
Can I use the BlueParrott B200 headset with other Bluetooth devices?
Yes. Read the “Pairing” and “Compatibility” sections of this user guide.
Why do people have trouble hearing me?
Check microphone placement (page 13) or adjust microphone volume knob on the
base (page 15).
21