Filter
Top Products
17
16
Basic Operations
Basic Operations
Do Not Disturb (DND)
If you do no want a particular handset to receive
calls, activate the DND function by doing the
following:
• Press FUNCTION key followed by the 4(DND)
key.
• The handset will display
DO NOT DISTURB!DO NOT DISTURB!
DO NOT DISTURB!DO NOT DISTURB!
DO NOT DISTURB!
• To cancel the DND press FUNCTION followed
by the 4(DND) key again.
Note: When DND is enabled, you will not be able
to pre-dial numbers.
Placing Calls
Live Dialing
• Press the desired LINE key or SPK.PHONE (for
handsfree on next available line). Listen for dial
tone.
• Enter the number you wish to dial
• To end a call press OFF or place handset in charger
cradle
Pre-Dialing
• Enter the number you wish to dial on the display.
• Press the desired LINE key or SPK.PHONE (for
handsfree on next available line).
• To end a call press OFF or place handset in charger
cradle
Wall Mount
Bracket
Remove Wall Mount Cover
Setup
Wall Mounting
The Wall Mount bracket is designed for use on standard Wall Mount plates only.
• Remove the wall mount cover at the back of the Base Unit
• Line up the tabs on the wall mount bracket with the holes at the back of
the Base Unit. Snap the wall mount bracket firmly in place.
• Mount the Base Unit on the wall. Position the Base Unit so the mounting
stubs will fit into the holes on the wall mount bracket. Slide Base Unit down
on the mounting stubs until it locks into placs.
Getting Started