Filter
Top Products
11
10
Setup
Getting Started
Setup
Ringer ON/OFF
• Access program mode
• Press the ( ) key until you see
CO LINE 1CO LINE 1
CO LINE 1CO LINE 1
CO LINE 1
RINGRING
RINGRING
RING
• Press the # key to change settings. The cursor
will blink to the right of the current setting
• Use the ( / ) volume keys to select either
ONON
ONON
ON or
OFFOFF
OFFOFF
OFF.
• Press the # key to confirm choice.
•
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL! is displayed.
• Repeat the above steps to set ringers for LINE
2, LINE 3 and LINE 4
Ringer Type
• Access program mode
• Press the ( ) key until you see
RINGER TYPERINGER TYPE
RINGER TYPERINGER TYPE
RINGER TYPE
• Press the # key to change settings. The cursor
will blink to the right of the current ringer setting
• Use the ( / ) volume keys to sample the
four ringer types
• Press the # key to confirm choice
•
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL! is displayed, and
the selected ringer type will be played once.
Ringer Volume Control
• From the idle (off) mode press the ( / )
volume keys to select volume level LOW / MID
/ HIGH
Handset and Base Unit Security Codes
Getting Started
• Made sure that only HANDSET 01 has a battery
pack installed. All other Handsets need to have
their battery packs removed during this process.
• Access program mode
• Press the ( ) key until you see
HS SECURITYHS SECURITY
HS SECURITYHS SECURITY
HS SECURITY
CODECODE
CODECODE
CODE
• Press the # key to change settings. You will be
prompted to
PLS ENTER CODEPLS ENTER CODE
PLS ENTER CODEPLS ENTER CODE
PLS ENTER CODE, waiting for you
to input a 6-digit security code. This security code
is selected by you, so please choose a security code
that you will remember. Also, record the
HSHS
HSHS
HS
SECURITY CODESECURITY CODE
SECURITY CODESECURITY CODE
SECURITY CODE in the space below for future
reference.
SECURITY CODE:________________
• Use the number keys to enter the 6 digit
HSHS
HSHS
HS
SECURITY CODE SECURITY CODE
SECURITY CODE SECURITY CODE
SECURITY CODE (i.e. 123456, 223455, 000005, etc.)
• Press the # key to confirm choice
•
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL! is displayed.
You now need to load the
HS SECURITY CODEHS SECURITY CODE
HS SECURITY CODEHS SECURITY CODE
HS SECURITY CODE into
the Base Unit, using HANDSET 01. Please follow these
steps:
• The Base Unit power should still be disconnected.
• Access program mode
• Press the ( ) key until you see
BS SECURITYBS SECURITY
BS SECURITYBS SECURITY
BS SECURITY
CODECODE
CODECODE
CODE
• Reconnect the Base Unit power. Once the power
is connected, you have only 10 seconds to
complete the next step.
• With
BS SECURITY CODEBS SECURITY CODE
BS SECURITY CODEBS SECURITY CODE
BS SECURITY CODE displayed on HANDSET
01, press the # key. The
HS SECURITY CODEHS SECURITY CODE
HS SECURITY CODEHS SECURITY CODE
HS SECURITY CODE has
now been loaded into the Base Unit.
•
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL!PROGRAMMING SUCCESSFUL!
PROGRAMMING SUCCESSFUL! is displayed.
• If you fail in loading the
HS SECURITY CODEHS SECURITY CODE
HS SECURITY CODEHS SECURITY CODE
HS SECURITY CODE into
the Base Unit,
ERROR! PLS REGISTER AGAIN!ERROR! PLS REGISTER AGAIN!
ERROR! PLS REGISTER AGAIN!ERROR! PLS REGISTER AGAIN!
ERROR! PLS REGISTER AGAIN!
is displayed, you have to repeat the above 6 steps
to load into the Base Unit until
PROGRAMMINGPROGRAMMING
PROGRAMMINGPROGRAMMING
PROGRAMMING
SUCCESSFUL!SUCCESSFUL!
SUCCESSFUL!SUCCESSFUL!
SUCCESSFUL! is displayed.
The VT 40-2421 is an advanced telephone system, which uses a unique 6-digit
security code for operation. The VT 40-2421 Handset and Base unit are factory
programmed with a default security code, which allows you use the system after
charging.
NOTE: When using multiple Handsets, you must assign a 6-digit system
security code (shared by all Handsets and Base Unit), and each Handset must
be assigned its own unique HANDSET ID (extension) number.
Assigning the Handset Security Code and Loading into the Base Unit
• Disconnect the AC power to the base unit.
Handset ID
The VT 40-2421 system supports up to 12 extension handsets. In order to use
the multiple handset capability of this product, you must first assign a 6-digit
security code. Please refer to Handset and Base Unit Security Codes before
proceeding with Handset ID.