Filter
Top Products
7
6
Setup
Plug the AC power adapter into an electrical outlet, and the DC connector into
the back of the base unit.
Connecting to phone line
Plug one end of the telephone line cord into the jack on the back of the base
unit. Plug the other end of this cord into the wall jack.
Checking for dial tone
After the battery is charged press
ON
on the Handset. The Phone icon
will appear on the handset display, and you will hear dial tone. If not, see In
Case of Difficulty.
Tone/Pulse selection
See BASE SETTINGS for details.
CAUTION: Use only the Qwest power supply provided with your Qwest
Unit.
To AC outlet
To telephone
jack
To telephone
socket outlet
AC adapter
IMPORTANT:
For best performance the QW2432
Should be installed as follows:
In an elevated location, in the center of
the room, with no obstructions nearby.
In a location that is away from other
electrical appliances such as microwave
ovens, personal computers, or
televisions.
Getting Started