VTech QW2432 Cordless Telephone User Manual


 
10
Getting Started
Charging Of Handset Battery Pack
The Handset of your QW2432 cordless telephone is powered by a rechargeable
battery pack. It charges automatically whenever the Handset is in the Base Unit.
You should charge the battery pack for 12 hours when you first receive
your phone. You'll know the battery pack needs charging when:
The low battery message is displayed :
The handset seems completely
dead, the LCD is completely
clear and does not activate when
you press the keys.
CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS
BY BATTERY, READ AND FOLLOW THESE INSTRUCTIONS.
1. Use only the approprlate type and size battery pack specified in the
instruction manual provided for this product.
2. Do not dispose of the battery pack in a fire. The cell may explode. Check
with State and local codes for possible special disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is corrosive
and may cause damage to the eyes or skin. It may be toxic if swallowed.
4. Exercise care in handling battery in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with this product
only in accordance with the instructions and limitations specified in the
instruction manual.
6. Observe proper polarity orientation between the battery pack and battery
charger.