Filter
Top Products
19
18
Range Extender
*
Use this option to register a Handset to the QW2432 Base. You can register
a total of four Handsets to the QW2432 Base. This process is activated
automatically whenever a new handset is powered up in range of the QW2432
Base.
You will be prompted to enter the 15-digit Base ID code printed on the underside
of the base unit. After entering this code, press
OK
. The Handset will display
SEARCHING FOR BASE, and then FOUND BASE V14 when the process is
complete.
Note : B
ase ID codes are 15 digits long and can include the following characters:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, , or #.
Basic Operation
Your QW2432 has an enhanced feature that is designed to improve performance. If you
are using your QW2432 in an area with excessive interference, or you require a moder-
ate increase in operating range. the Range Extender feature can help to improve both
the sound quality and range. Actual range will depend on your environment.
To select the Range Extender setting, follow the procedure listed below:
• In the idle(OFF) mode, press MENU
and use the scroll keys to select
RANGE EXTENDER, then press OK.
• There are 3 option settings in the
RANGE EXTENDER menu:
1. Select OFF to disable RANGE
EXTENDER
2. Select ON to enable RANGE
EXTENDER. An "E" icon will
appear in the upper left corner of
Handset display, indicating that
RANGE EXTENDER is ON.
3. Select AUTO to allow your
QW2432 to automatically
monitor the signal strength between the handset and base unit, and
activate whenever necessary. With this option selected, your QW2432
may occassionally enable or disable the RANGE EXTENDER feature.
When RANGE EXTENDER is enabled, an "E" icon will appear in
the upper left corner of the Handset display.
• Use the scroll keys to select the desired setting, and then press OK to
confirm the selection.
Note: When Range Extender mode is enabled, your QW2432 will consume
more battery power. That means the standby and talk time of your Handset
will be shorter.
Register