Filter
Top Products
11
10
Wall Mounting
Getting Started
1
2
3
The Wall Mount bracket is designed for
use on standard Wall Mount plates only.
1. Line up the tabs on the wall
mount adapter with the holes on
the back of the base unit. Snap
the wall mount bracket firmly in
place.
2. Plug the AC adapter into an
electrical outlet, and the DC
connector to the back of the base
unit. If the handset battery pack
has not been charged previously,
place the handset in the base
unit cradle, and allow it to charge
for 12 hours.
3. Connect the telephone line cord
to the jack on the back of the
base unit, and the other end to
the wall jack.
4. Mount the base unit on the wall.
Position the base unit so the
mounting studs will fit into the
holes on the wall mount bracket.
Slide base unit down on the
mounting studs until it locks into
place.