Filter
Top Products
13
12
Enter Base ID Code
1. After charging the Handset,
remove it from its Charge Cradle,
the screen will display:
2. Press
NEW
, then enter the 15
digit Base Unit ID code, located
on the underside of the Base
Unit.
3. Press
OK
. The Handset will
display: PLEASE WAIT!!
4. Wait approximately 15 seconds.
The Handset will display:
FOUND BASE V14
If the Handset displays: BASE
BUSY TRY LATER, this
indicates that the system is in
use. Wait until the Base Unit is
in the idle (on hook) mode, and
repeat step 2 to 4.
Congratulations! You can now enjoy
the benefits of your multi-Handset
system.
Registration and Operation
Getting Started