24
The QW2432 Base unit has several settings that can be adjusted according
to your preference and system requirements.
Select Base Ringer Melody:
• The phone must be off.
• Press the star key three times ( ). The Base will emit a happy
tone and the Power and Line In Use LEDs will flash rapidly.
• Press the 1,2,3,4,5, or 6 keys to select the Ringer Melody. After each key
press, the Base will emit a 1-second preview of the selected ringer.
• To save the selected ringer (and exit) press # .
• To exit without saving press .
Select Tone / Pulse:
• The phone must be off.
• Press the star key three times ( ). The Base will emit a happy
tone and the Power and Line In Use LEDs will flash rapidly.
• Press the 7 key to toggle between TONE and PULSE dialing mode. The
Line In Use LED will toggle ON when TONE is selected and OFF when
PULSE is selected.
• To save the TONE/PULSE selection (and exit) press # .
• To exit without saving press .
Select Base Ringer Volume and OFF:
• The phone must be off.
• Press the star key three times ( ). The Base will emit a happy
tone and the Power and Line In Use LEDs will flash rapidly.
• Press the volume up and down keys (
) to adjust the Base
Ringer volume. After each press of the volume keys, the Base will emit
the selected Ringer and volume setting for one second.
• To turn the Base ringer OFF, press the volume down key (
) until
no ringer preview is played.
• To save the Ringer Volume selection (and exit) press # .
• To exit without saving press .
Base Settings
***
*
***
*
***
*
Basic Operation