VTech MI6807 Cordless Telephone User Manual


 
www.vtechphones.com
7
Getting started
Registration
NOT REGISTERED
The handset
number is used
as the extension
number.
When rst
purchased, the
new handsets
need to be
charged for ve
minutes before
registering to the
telephone base.
If the registration
is not successful,
lift all handsets
out of their
charger and
place them back
in the charger. Try
the registration
process again.
PRESS FIND HNDST
4 SEC ON BASE
To register a handset
When rst purchased, all accessory handsets show NOT REGISTERED
on the screen. To register a handset:
1. Place the handset in a charger which is connected to the power
socket. If PRESS FIND HNDST 4 SEC ON BASE does not appear
on the screen after a few seconds, lift up handset and place in the
charger again.
2. On the telephone base:
• Press and hold FIND HANDSET for four seconds.
• Release FIND HANDSET once the IN USE light comes on.
on mi6866 telephone base
on mi6879 telephone base
After a while the handset will emit a series of tones, and the newly registered handset will be
assigned the lowest extension number not previously assigned to another system handset (1-4)
when successfully registered. Repeat steps 1 and 2 if the new handset does not successfully
register to the telephone base within two minutes.
Four
seconds
later:
Four
seconds
later: