Filter
Top Products
38
Multiple handset use
PTT to multiple handsets
When there are multiple handsets registered to the telephone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-four calls when
one to five handsets are registered, and a maximum of one-to-three calls when
six or more handsets are registered. The first four registered handsets will be
able to use this feature. Other handsets can only use PTT for one-to-one calls.
To begin a PTT call to multiple handsets:
Press and hold PUSH TO TALK when the handset is not in use.
If you have more than two handsets, press PUSH TO TALK when the
handset is not in use. Press and #, or or to highlight >All handsets
then press MENU/SELECT or PUSH TO TALK.
Your handset displays Connecting to all handsets... for a few seconds. When
the connection is made, all handsets display Press and hold [PTT] to talk and
beep once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to all
destination handsets.
While you are speaking, your handset displays PTT To handset:
X
(X
represents the destination handset).
Release PUSH TO TALK after speaking. All eligible handsets beep once
again. After the handsets beep, you can press and hold PUSH TO TALK to
speak again or the destination handsets can respond (see Answer a PTT call
on page 39).
Press OFF/CANCEL to end the PTT call. The handset displays Push to talk Ended
for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
After PUSH TO TALK is released, the PTT call session remains open for a short
time. If no one presses PUSH TO TALK within 10 seconds, the PTT call session
ends automatically.
1.
•
•
2.
3.
4.