Filter
Top Products
45
Telephone settings
Voice Announce
®
caller ID
You can set your handset and/or telephone base to
announce the caller ID information for incoming calls. The
voice announce caller ID setting is independent for each
handset and the telephone base.
To change the setting:
Press MENU on the handset when it is not in use.
Press or to highlight Settings, then
press SELECT.
Press or to highlight Annc Caller ID, then
press SELECT.
Press or to highlight Handset or Base, then
press SELECT.
Press or to choose On or Off, then press SET to
save. You hear a conrmation tone.
1.
2.
3.
4.
5.
To use the voice announce caller ID feature, you must subscribe to caller ID
service from your telephone service provider.
Only the rst four registered handsets will be able to use this feature.
If the phone number of the incoming call matches the last 7 digits of a
directory entry, the name will be announced as it appears in the entry.
The phone number will be announced when the name is unknown, private
or not provided. Only the last 11 numbers of a phone number is announced.
No information will be announced if both the name and number are private,
unknown or not provided.
This feature is not supported with headsets.
This feature does not announce information for call waiting calls.
If both home and cell lines are ringing, only the caller ID information of the
rst ringing line will be announced.
It takes at least 2 rings for the phone to receive caller ID information and
announce it. If the phone is answered before the end of the second ring, it
will not have time to announce the caller ID information.
Pronunciation of names may vary with this feature. Not all names may be
pronounced correctly.
•
•
•
•
•
•
•
•
•
•
SETTINGS
Rename handset
Key tone
Dial tone
Annc Caller ID
BACK
SELECT
ANNC CALLER ID
On
Off
BACK
SET
Voice Announce
®
is a registered trademark of ClassCo Inc.