Filter
Top Products
25
Bluetooth
Add a cell phone (continued)
Press NEXT to turn on the telephone base
discoverable mode. The handset displays Set cell
to search base: VTech DS6472 discoverable PIN:
0000. Promptly turn on the Bluetooth feature of your
cell phone and search for or add new devices.
Your cell phone may require a passcode. In this
case, the handset displays Check cellular. ENTER
PASS CODE. Enter the cell phone passcode into
the handset and press SET to save.
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process. The handset displays Adding Cell Phone A
to device list...
When a device is successfully connected, the handset
displays Cell Phone A is added and connected
to base. You hear a conrmation tone. The
corresponding status icon ( 1 or 2) displays. The
corresponding device light on the telephone base (D1
or D2) turns on.
If you have trouble pairing your cell phone, it may not
be compatible with your DS6472. Check the Bluetooth compatibility list
at www.vtechphones.com.
5.
•
6.
7.
The pairing process may take up to one minute. If the pairing process fails,
try again.
The steps for the pairing process may vary for different cell phones. If
this happens, follow the prompts on your cell phone and your DS6472 to
complete the pairing process.
If you put the handset back in the telephone base or charger while pairing,
the pairing is canceled and the handset returns to idle mode.
•
•
•
Adding
Cell Phone A
to device
list...
Cell Phone A
is added
and connected
to base.
Set cell to
search base:
VTech DS6472
discoverable
PIN:0000