SETUP
Installing a Paper Roll
16 V
X
810 DUET INSTALLATION GUIDE
To install a Paper
Roll
1 Lift the paper door up.
Figure 6 Opening the Paper Door
2 Lift the paper tray and remove any partial roll of paper.
3 Hold the roll so the paper feeds from the bottom of the roll.
4 Place the paper roll into the printer tray.
Figure 7 Loading Paper Roll
5 Pull the paper up past the glue residue on the paper roll.
6 Close the paper roll cover by gently pressing on the cover until it clicks,
allowing a small amount of paper past the glue residue to extend outside the
printer door.
CAUTION
To prevent damaging the print roller, always gently press down on the paper roll
cover to close it.