Filter
Top Products
Chapter 1 Getting Started
13
Calibrating the PA600 Screen
The calibration screen automatically appears when the PA600 powers on for the first
time or after the system is reset. Calibrate the screen at any time through the
following:
1. Tap Start → Settings → Control Panel.
2. Double-tap Stylus. The Stylus Properties win-
dow appears.
NOTE: Or, simultaneously press FUNC and
ESC.
3. Tap the Calibration tab.
4. Tap Recalibrate to calibrate the screen. The
align screen window appears.
5. Tap the target firmly and accurately.