Filter
Top Products
Chapter 1 Getting Started
9
Charging the Battery with the Docking Station
1. Plug the AC Adapter Cable into the Docking Station’s power jack, and connect
the other end of the AC Adapter into an electrical outlet.
2. Slide the PA600 down into the Docking Station until it
snaps into place.
3. The connection is secure when the PA600’s bottom
edge aligns with the Cradle. (The PA600’s LED indica-
tor lights up red).
Checking the Battery Status
If the battery level becomes low during the course of normal use, a status icon
appears on the PA600’s screen indicating low or very low battery status. In both
cases, perform a Microsoft ActiveSync operation to backup data, and recharge the
PA600 as soon as possible. If the battery level reaches low status, the device will
enter a sleep mode and cannot power up until the battery is charged, or until the
PA600 connects to an external power source.
LED Status
LED Meaning
PA600 Solid Red Charging.
Solid Green Charging Complete.
Docking
Station
Power LED
Power is On.
Charging LED: Charging (For Spare Battery Only).
Sync LED Synchronization is Occurring.
unitech
unitech