Filter
Top Products
Base Unit Controls & Functions
BASE ANTENNA
9VDC
INPUT JACK
/
TEL LINE
TONE/PULSE
Switch
TEL LINE Jack
DC Input Jack
Base Unit
Antenna
IN USE LED
CHARGE LED
PAGE/FIND
PAGE
IN USE LED
CHARGE LED
TONE/PULSE SWITCH
Use to select either Tone Dialing or Pulse Dialing.
(Functional on Australian Models only)
Plug a standard telephone line cord into this jack and
the other end of the cord into the standard telephone
socket.
Plug the AC Adaptor cord into this Jack. Then plug the
AC Adaptor into a standard wall outlet.
Telescopic antenna provides maximum communication
range when fully extended.
Lights when the phone is in use; flashes when the
PAGE/FIND button is pressed.
Lights when the Handset is on the Base Unit and the
Battery Pack inside the Handset is charging.
The Page/Find feature sends a signal from the Base
Unit to the Handset causing it to beep. This is useful
for locating the Handset when it is away from the Base
Unit. Press the PAGE button on the Base Unit and
listen for the tone from the Handset.
NOTE: The Page/Find Feature does not work when the
phone is in use.
9