Filter
Top Products
Important Electrical Considerations
Unplugall electrical appiiances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and damage
any device connected to it. The XC630/633 is no exception. Note: Please do
not attempt to unplug any appliance during an electrical storm.
Operating Range
Your handset and the basestation can communicate over a certain range. For
clearest reception, keep the base and Handset antenna fully extended when
using your handset away from the base.
Do make a few trial calls in and around your home or office to get a feel for
the operating range in your particular surroundings.
If you receive acall whileyou are out of range,the handset
may not ring. Even if it does ring, the call may not connect
when you press the TALK button. To receivethe call, move
closer to the base before you press the TALK button again.
~
NOTE
26
If you lose a call after
.
You wereprobably almost out of range.
changing channels.
Move closer to the basebefore changing
channels. Before placing the call again,
place the handset on the base for at least 6
seconds.
Numbers stored in
.
The numbers stored in memory may have
memory cannot be
been lost due to a power down condition. In
dialed.
this case, you will have to reprogram the
numbers into memory.
Phoneseemsdead?
.
Remove the Handset from Base Unit (if is
Power off and on again.
on the Base Unit).
.
Remove the Handset battery for 5 minutes.
If you are unable to
.
Unplug the Base Unit from the main power
turn the handset
supply for a 5 minutes.
ON/OFF, or if the base
.
Reinstall the batteryto the handset.
consistently fails to
.
Restore power to the Base Unit.
respond to the keys
.
Place the Handset back on the Base Unit.
being pressed.