Filter
Top Products
Installing Your Cordless Telephone
Selecting the Installation Location
Select a location for the XC630/633 to avoid excessive heat or humidity (as in
a kitchen or bathroom). The Base Unit can be placed on a desk or tabletop
near a standard 230/240Y AC outlet and standard telephone line socket, or
mounted on a wall. Keep the Base Unit and Handset away from sources of
electrical noise, (motors, fluorescent lighting). Be sure there is sufficient space
to safely extend the Base Unit antenna fully.
Connecting the Telephone Line
Plugthe telephone linechord from the Base Unit into a standard telephone
socket.
~
If you do not have a telephone socket, contact Telecom for
further information.
NOTE
CAUTION:
. Never install telephone wiring during a lightning storm.
.
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
.
Use caution when installing or modifying telephone lines.
~
NOTE
The base unit must be connected to a working electrical
outlet. Calls cannot be made from the handset if the base
unit is unplugged or switched off, or if the electrical power
is interrupted.
14