Filter
Top Products
Important Safety Instructions
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electrical shock, and injury to
persons, including the following:
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
4.
Do not use this product near water; for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming
pool.
5.
Do not place this product on an unstable cart, stand, or table. The
telephone may fall, causing serious damage to the unit.
6.
Slots and openings in the cabinet and the back or bottom are provided for
ventilation. To protect the product from overheating, these openings
should never be blocked or covered. This product should never be placed
near or over a radiator or heat register. This product should not be placed
in a built-in installation unless proper ventilation is provided.
7.
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8.
Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by persons walking on it.
9.
Do not overload walloutlets and extension cords, as this can result in the
risk of fire or electrical shock.
10. Never push objects ofany kind into this product through cabinet slots, as
they maytouch dangerous voltage points or short out parts that could
result in a risk of fire or electrical shock. Never spill liquid of any kind
on the product.
11. To reduce the risk of electrical shock, do not disassemble this product.
Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect re-assembly can cause electrical shock
when the appliance is subsequently used.
5