Uniden XC610 Series Cordless Telephone User Manual


 
11.
To
reduce the risk of electric shock. do not
Important Safety Instructions
When using your telephone equipment, these basic
safety precautions should always be followed to
reduce the risk of fire, electrical shock, and injury to
persons:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Read and understand all instructions.
12.
Follow all warnings and instructions marked on
the product.
Unplug this product from the wall outlet before
cleaning, and use a dry cloth, without liquid or
aerosol cleaners.
Do not use this product near water; for example,
near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement, or near a
swimming pool.
Do not place this product on an unstable cart,
stand, or table. The telephone may fall, causing
serious damage to the unit.
Slots and openings in the cabinet and the back
or bottom are provided for ventilation. To protect
the product from overheating, these openings
must not be blocked or covered. This product
should never be placed near or over a radiator
or heat register. This product should not be
placed in a built-in installation unless proper
ventilation is provided.
13.
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your dealer or local
power company.
Do not allow anything to rest on the power cord.
Do not locate this product where the cord will be
damaged by persons walking on it.
Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electrical
shock.
Never push objects of any kind into this product
through cabinet slots, as they may touch
dangerous voltage points or short out parts that
could result in a risk of fire or electric shock.
Never spill liquid of any kind on the product.
2
disassemble this product. Take it to qualified
service personnel when service or repair work is
required. Opening or removing covers may
expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
A.
B.
C.
D.
E.
F.
When the power supply cord is damaged or
frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or
water.
If the product does not operate normally
when following the operating instructions.
(Adjust only those controls that are covered
by the operating instructions. Improper
adjustment of other controls may result in
damage and will often require extensive
repair work by a qualified technician.)
If the product has been dropped or the
cabinet has been damaged.
If the product exhibits a distinct change in
performance.
Do not use the telephone to report a gas leak in
the vicinity of the leak.
3