Charging the Battery Pack
Initial Battery Charging
The rechargeable Nickel-Cadmium battery pack
must be fully charged before using your phone for
the first time. We recommend that the battery pack
charge for approximately
15-20
hours, without
interruption, before plugging the phone line into your
new phone.
1.
2.
Place the Handset or
the Base Unit. Either
place the Handset
facedown
-or-
wall.
Note: Make sure to
change the Handset
Retainer before
hanging up the phone.
Hang the Handset on
the cradle when the
phone is mounted on a
Make sure the
CHARGE LED lights.
If the LED doesn’t
light, check to see that
the AC adapter is
plugged in, and that
the Handset is making
good contact with the
Base Unit charging
contacts.
Charging from the Charging Cradle
(Only for the XC71 0 phone.)
1.
2.
3.
Plug the Charging
Cradle AC Adapter
cord into the DC input
jack on
the Charging
Place the AC Adapter
cord around the strain
relief.
Plug the AC Adapter
into a standard 230/
240V AC wall outlet.
4. Place the Handset
upright on the Charging
Cradle. The red
CHARGE LED lights
while the unit is
charging.
18
19