Filter
Top Products
TONE/PULSE
Switch
DCInput Jack
TEL LINE Jack
Handset Retainer
Base Unit
Antenna
IN USE LED
CHARGE LED
PAGE/FIND
Button
Use this switch to select either Tone Dialing or Pulse
Dialing. (Available on Australian Models only)
Plug the AC Adapter cord into this jack. Then plug the
AC Adapter into a standard wall outlet.
Plug the supplied telephone line cord into this jack and
the other end of the cord into the standard modular
telephone socket.
Reverse this retainer to hang up the Handset when the
XC 310 is mounted on a wall.
Collapsible antenna provides maximum range when
fully extended and vertical.
Lights when the phone is in use.
Lights when the Handset is in the Base Unit and the
Battery Pack inside the Handset is charging.
Sounds a tone from the Base Unit to the Handset.
This can be used to locate the Handset when it is away
from the Base Unit.
(Note: The Handset does not sound if the phone is in
use or if the Handset RINGON/BATTSAVEswitch is in the
"BATT SAVE"position.)
8