Filter
Top Products
1. Removethe battery compartment cover on
the Handset by sliding it down.
2. Connect the Nickel-Cadmium Battery Pack
by plugging it into the socket at the top of
the battery compartment. Note: The
connector fits only one way and requires
only a minimal amount of pressure to insert.
Always install the Battery Cable with the
BLACK wire to the left.
3. Place the Battery Pack inside the
compartment and slide the battery cover
back on. Make sure not to get the wires
from the Battery Pack caught in the cover.
...
t
=
"-"
Charging the Battery Pack
The rechargeable Nickel-Cadmium Battery
Pack included with your XC 310 must be
chargedfor approximately 12-16 hours before
usingthe phone for the first time. Place the
Handset on the Base Unit and make sure the
CHARGELED lights. If the CHARGELED does not light, check to see that the
AC adapter is plugged in.
Cleaning the Battery Contacts
To maintain a good charge, it is important to clean all 4 charge contacts on
the Handset and Base Unit about once a month. Use a pencil eraser or other
contact cleaner. Do not use any liquids or solvents.
CONTACTS
...1'.:..
a5(105
~(§)cIJ
d5c!5<6
@@)@)
es~itB
ONTACTS
CONTACTS
14
----------
.
..\AlE