Filter
Top Products
Placing a Call
To place a call with your XC 310:
1. Removethe Handset from the Base Unit and press TALK.
2. Dial the number you are calling.
3. When you have finished the call, press TALKor return the Handset to the
Base Unit.
NOTE: Ifyou don't place the Handset back on the Base Unit,you will
need to press TALKto hang up the phone.
Selecting a Channel
TheCHANNELbutton on the Handset allows you to choose among factory set
channels. If you are receiving static or other interference on a channel, press
the button to switch to another channel. This function works only when the
phone is in use.
NOTE: If you have more than one cordless phone in your house, they
must be set to different channels.
Using the Flash Button
Use FLASHto send a timed "hook-flash" on the telephone line for accessing
services such as call waiting, etc. To use this feature, simply press the
FLASH/R. TONEbutton while operating the Handset.
Setting the Receiver Volume
While on a phone call, press the VOLUME/A.VOLbutton to select either loud or
soft volume.
Using the Redial Button
ROUPdials the last number that you called. This feature is extremely useful
when the number you called is busy. To use this feature, simply press
FLASH,then ROUP.The last number called will then be dialed again.
NOTE: If any other key is pressed before ROUP,the phone will not redial
the last number.
Answeri ng a Call
Your XC 310 will ring when someone is calling your number. If your Handset
isnotinthe BaseUnit,pressTALKto answer the call. If your Handset is in
the Base Unit, the AutoTalkfeature allows you to answer the call by simply
lifting the Handset from the Base Unit and beginning your conversation.
16