Filter
Top Products
70
Remote Commands
Command Function Command Function
0 then 1 Repeat a Message* 0 then 6 Answering System On
0 then 2 Playback Messages 0 then 7 Memo Record/Stop**
0 then 3 Skipping a Message 0 then 8 Greeting Record/Stop**
0 then 4 Deleting a Message 0 then 9 Answer System Off
0 then 5 Stop Operation 1 then 0 Help Guidance
* To Repeat a Message, press
[0] then [1] within four seconds to repeat the previous message, or press [0] then [1]
after four seconds to repeat the current message.
** For the Memo Record and Greeting Record/Stop, the rst time you enter the corresponding command, it starts the
Recording. If you want to stop the recording, press
[0] then [7], [8], or [5].
When you nish, you will hear intermittent beeps indicating that the answering machine is in the command
waiting mode. You can enter another command from the chart, or you can hang up to exit the answering ma
-
chine.
When you hang up, the answering machine automatically returns to its normal standby setting.
Note:
The system will only playback messages for four minutes and then it returns to the command-waiting mode.
To continue playing your messages, press
[0] then [2] again within 15 seconds.
If you enter an incorrect security code three times, you will hear a beep and the answering machine will return
to standby.
5)
6)
•
•
•