Filter
Top Products
26
Enter the number for this entry (Edit Number 1).
Once you have stored a name, EDIT NUMBER1 appears next. Use the number
keypad,
[right] or [left] on the four-way function key, or the DELETE soft key to
enter the phone number 1; the phone number can contain up to 32 digits. If you
need the phone to pause between digits when it’s dialing (for example, to enter an
extension or an access code), press
[redial/pause] on the handset or the PAUSE soft key on the base to
insert a two-second pause. You will see a P in the display. You can also use more than one pause together if
two seconds is not long enough. Each pause counts as one digit. Press the
OK soft key when you are
nished.
EDIT NUMBER2 appears next. Use the same procedure when entering the phone number 1 to enter the
phone number 2. Press the
OK soft key when you are nished.
Assign a personal ring tone for this entry (Personal Ring) (Handset only).
You can attach a personalized ring tone to each phonebook entry; the phone will
use this ring tone when this person calls. Move the cursor to highlight one of the
20 different ring tone options. As you highlight each ring tone, you will hear a
sample of that tone. When you hear the ring tone you want to use, press the
OK
soft key. If you do not want to use a personal ring tone for this phonebook entry, select the NO SELECTION
option, and the phone will use your standard ring tone setting.
Assign this entry to a Speed Dial number (Speed Dial).
Your phone has 10 speed dial numbers, 0 to 9. Move the cursor to select the
speed dial number you want to assign to this phonebook entry, and press the
OK
soft key. Select NO SELECTION if you do not want to assign this entry to a speed
dial number.
You will hear a tone conrming that the new phonebook entry has been stored, and DONE! appears in the
display.
Note: When the shared memory is full, the oldest Caller ID message is overwritten.
4)
5)
6)
7)
Edit Number1
｡
BACK OK
Edit Number1
｡
BACK OK
Personal Ring
No Selection
Flicker
BACK DELETE OK
Personal Ring
No Selection
Flicker
BACK DELETE OK
Speed Dial
No Selection
SPD1:Empty
BACK DELETE OK
Speed Dial
No Selection
SPD1:Empty
BACK DELETE OK