Filter
Top Products
45
Conferencing with one outside line
To hold a conference call with one outside line, simply have the handsets or base join the call.
Conferencing with 2 outside lines
Follow the steps below to allow both outside lines to participate in a conference call:
During a call, press
[int’com/hold] on the handset or base to put the rst caller on hold.
Press the line key (the
LINE1 or LINE2 soft key on the handset, or [LINE2] or [LINE2] on the base) for a free
line to make or answer a second call.
When the second call is connected, press the
MENU soft key, and then select CONFERENCE to initiate a
conference call.
To disconnect a single caller, press the corresponding line key (the
LINE1 or LINE2 soft key on the handset,
or
[LINE2] or [LINE2] on the base) to place the caller you wish to keep speaking to on hold and then press
[ ] on the handset or [ ] on the base to hang up the other caller. For example, to hang up Line 2 but leave
Line 1 connected:
Press the line 2 key (
LINE2 soft key on the handset, or [LINE2] on the base) to put Line 1 on hold.
Press
[ ] on the handset or [ ] on the base to hang up Line 2.
Press the line 1 key (
LINE1 soft key on the handset, or [LINE1] on the base) to take Line 1 off hold and con-
tinue the conversation.
To hang up both lines, press
[ ] on the handset or [ ].
1)
2)
3)
4)
•
•
•