Filter
Top Products
52
Installing the Optional Headset
Your phone may be used with an optional headset. To use this feature, insert the head-
set plug into the headset jack. Your phone is ready for hands-free conversations.
Headsets may be purchased by calling the Uniden Parts Department. See back cover
page for contact information.
Seven-Digit Dialing
If you can make a local call by dialing only 7 digits (instead of 10), you can program
your local area code into your phone. If you get a call from within your area code, you’ll
only see the 7-digit phone number. If you get a call from outside your area code, you’ll
see all 10 digits. To enter an area code, follow the steps below:
Press the
MENU soft key. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
Move the cursor to select
or . Press the OK soft key.
Use the number keypad (
0-9) to enter a 3-digit area code. If an area code has already been stored, it will ap-
pear in the display. Press the
DELETE soft key to delete the stored code, and then enter a new one.
Press the
OK soft key. You will hear a conrmation tone.
Inuse Line Setup (Base only)
The Inuse Line Setup feature is only used in instances where you have multiple phones where users may pick up an
extension while someone else is on the phone. Only in very rare instances where your phone system is not detecting
that an extension phone is picked up will you ever need to change this feature. In most all situations, this feature will
never need to be used or modied from the factory default setting of TYPE-A. There are three settings for this fea-
ture: TYPE-A, TYPE-B, or OFF.
1)
2)
3)
4)