Filter
Top Products
[ 26 ] MEMORY DIALING
Memory dialing from Talk Mode
1)Press .
“
Talk” and the volume setting appear
on the display.
If you set the ringer to off, “<Ringer
Off>” appears on the display.
2)press .
3)Enter a two-digit number (01 - 20) to
select the memory location of the
desired phone number.
The selected phone number is displayed.
Then the number is dialed.
Chain Dialing
The 20 memory locations on the handset are not limited to phone numbers.
You may want to store in memory a group of numbers (up to 20 digits) that
you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
when you are prompted to enter the account number, simply press and
then the location where the special number has been stored.
Store your special number with identifying name in memory as you would a
phone number. (Refer to “Storing Phone Numbers and Names” on page 21.)
Enter a pause as necessary in the sequence.
A pause counts as one digit and represents a two second delay in time
between digits as they are sent.
If you select a memory
location that does not
have a stored number,
the handset will beep
rapidly and the phone
will not dial.
TRU546 ENG 7/25/01 1:20 PM Page 26