Filter
Top Products
GETTING STARTED[ 8 ]
Battery use time (per charge)
From fully charged
• Six hours continuous use
• Ten days when the handset is in the standby mode
Low Battery Alert
When the battery pack is very low and needs to be
charged, the phone is programmed to eliminate
functions in order to save power. If the phone is not
in use, “Low Battery” appears on the LCD and
none of the keys will operate.
If the phone is in use, “Low Battery” flashes and
the handset beeps. Complete your conversation as
quickly as possible and return the handset to the base
unit for charging.
The last number dialed in the redial memory, the names
and the numbers stored in the memory locations are
retained for up to 2 minutes while you replace the
battery pack.
Cleaning the Battery Charging Contacts
To maintain a good charge, it is important to
clean the battery contacts on the handset and
base unit with a dry cloth or a pencil eraser
about once month.
Do not use any liquids or solvents.
contacts
• Even when the
battery pack is not
being used, it will
gradually discharge
over a long period of
time. For optimum
performance, be sure
to return the handset
to the base unit after
a telephone call.
• If you must replace
the battery pack
during a telephone
call, complete the
replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
TRU546 ENG 7/25/01 1:20 PM Page 8