Filter
Top Products
The paging feature
does not work when
the phone is in use.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone’s channel for
clear operation. Interference can come from appliances or other phones in your home. This function
works only when the phone is in use.
The
channel button on the handset allows you to choose between 30
factory set channels. During the course of a conversation, if you hear
static or noise which makes it difficult to hear, press
channel. The
talk/battery low LED flashes, indicating the phone is changing to
another channel.
Using the Flash Button
Use the flash button for accessing services such as call waiting.
If you receive a call during your conversation, press the
flash button on the handset. Press the flash
button again to return to the previous call.
Using the Page/Find Feature
The Page/Find feature sends a signal from the base to the handset causing it to beep. This is useful for
locating the handset when it is away from the base. To use this feature, press
page/find on the base.
The handset beeps for 5 seconds. (Press and hold the
page/find button for more than 2 seconds, to get
a continuous beep for a minute.)
If you hold down
page/find more than a minute, the handset beeps until you release page/find.
On the handset press
talk to end the page. Press talk again if you do not wish to make a call.
Traveling Out of Range
When you begin to move too far from the base, you will first hear a clicking sound. As you travel
further out of range, the voice transmission will begin to break up. If you pass the range limits of
the base, your call will terminate.
USING YOUR PHONE [ 13 ]
USING YOUR PHONE
TRU241_2.4GHz 5/22/00 4:39 PM Page 13