Filter
Top Products
[ 8 ] INSTALLATION
Direct Wall Plate Mounting
If you don’t have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting
screws into the wall.
• Try to mount your phone within 10-15 feet of a working phone
jack to avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight
of the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will
be placed.
1. Insert two mounting screws into the wall, (with their appropriate
anchoring device), 3-15/16 inches apart. Allow about 3/16 of an
inch between the wall and screwheads for mounting the phone.
2. Refer to steps 1 through 9 as in the “Mounting the Base Unit on a
Wall” section. (See page 7.)
TOP
3/16
in.
3-15/16
in.
TRU241_2.4GHz 5/22/00 4:39 PM Page 8