Filter
Top Products
[ 12 ] USING YOUR PHONE
Chain Dialing
After dialing a number you may be requested to enter a special access code, for example, when
performing a banking transaction.
1. Store the access code into one of the memory locations (0-9).
2. Dial the main number.
3. Press
memory and the memory location of the access code at the appropriate time.
Erasing a Stored Number
1. Remove the handset from the base.
2. Press
memory twice.
3. Press the memory location number (0-9) you want to erase. You hear a long beep confirming that
you have erased the number.
Mute
You can temporarily turn off the handset microphone so that the person you are talking with cannot
hear you. During a telephone call, press
mute to turn off the microphone. To cancel mute, press
mute or talk.
Replacing a Stored Number
Remember, your TRU 241 phone has 10 memory locations represented by the numbers 0-9 on the
keypad. If you store a phone number in one of these locations, then attempt to store a different
number in the same location later, the new number will replace the previous one.
TRU241_2.4GHz 5/22/00 4:39 PM Page 12