Filter
Top Products
Entering a Pause in Memory Dialing
If you would like to use a phone number stored in memory to access voice mail, for example, you can
store a pause in the phone number sequence.
To use this function, follow steps 1 and 2 in “Storing a Number in Memory”, then press the
pause
button on the handset to place a pause in the phone number sequence.
Follow the remaining steps in the “Storing a Number in Memory” section to complete the operation.
Storing Mixed Tone/Pulse Numbers
If your phone is set up for pulse dialing, you can store a mixed mode number (up to 20 digits) to easily
access long distance services.
1. Remove the handset from the base and press
memory. The talk/battery low LED flashes.
2. Enter the number to be dialed in pulse mode.
3. Press the
tone button on the handset. The tone button counts as one digit and enters a pause.
4. Enter the number(s) to be dialed in tone mode.
5. Press
memory and a number (0-9) on the keypad for the memory location you wish to use. You hear
a long beep and the
talk/battery low LED goes out.
Dialing a Stored Number
To dial a phone number stored in memory, press talk, then press memory and the memory
location (0-9). Your phone will dial the stored number.
• Remember, the
phone number you
wish to store cannot
have more than 20
digits, including the
pause. (The pause
button counts as
one digit.)
• If you select a
memory location
that does not have
a stored number,
the handset will
beep rapidly and
the phone will
not dial.
USING YOUR PHONE [ 11 ]
USING YOUR PHONE
TRU241_2.4GHz 5/22/00 4:39 PM Page 11