Filter
Top Products
[ 10 ] USING YOUR PHONE
Making and Receiving Calls
Storing a Number in Memory
Your TRU 241 phone has 10 memory locations for storing important telephone numbers.
1. Remove the handset from the base and press
memory. The talk/battery low LED flashes.
2. Enter the phone number you want to store (up to 20 digits).
3. Press
memory and enter a number (0-9) on the keypad for the memory location you want to use.
You hear a long beep and the
talk/battery low LED goes out indicating the number has been
stored successfully.
If you select any keys other than 0-9, the handset will beep rapidly and no number will be stored.
• You have 20 seconds
after pressing
memory to enter
the number you
wish to store.
Otherwise, an error
tone will sound.
• Write down stored
numbers on the
supplied memo
sticker.
USING YOUR PHONE
Handset on Base Handset off Base
Answer call
When the phone rings, Press any key.
remove the handset from the base. (AutoTalk)
1. Remove the handset from the base and press
talk. 1. Pick up the handset and press talk.
Make call
2. The
talk/battery low LED lights. 2. The talk/battery low LED lights.
3. Listen for the dial tone. 3. Listen for the dial tone.
4. Dial the number. 4. Dial the number.
Hang up
Return handset to the base, (AutoStandby) or Press
talk.
press talk.
1. Remove the handset from the base and press
talk. 1. Pick up the handset and press talk.
Redial
2. Listen for the dial tone. 2. Listen for the dial tone.
3. Press
redial to dial the last number dialed. 3. Press redial to dial the last
number dialed.
TRU241_2.4GHz 5/22/00 4:39 PM Page 10