Filter
Top Products
[ 7 ]GETTING STARTED
GETTING STARTED
B. Install the battery pack
Place the handset on the base unit and charge the battery pack for at
least 15-20 hours before plugging the phone line into your phone.
Battery use time (per charge)
From fully charged:
• 6 hours continuous use.
• 10 days when the handset is in the standby mode.
Low battery alert
If the phone is not in use, talk/low batt LED flashes on the LCD and none
of the keys will operate. If the phone is in use, talk/low batt LED flashes
and the handset beeps. Complete your conversation as quickly as possible
and return the handset to the base unit
for charging.
• Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base
unit after each
telephone call.
• If you must replace the
battery pack during a
telephone call,
complete the
replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
• Use only the Uniden
Battery supplied with
your phone.
Replacement batteries
are also available
through the Uniden
Parts Department
(See page 43) or
www.uniden.com
note
EXA3955 newstyle 3.3 7/4/1 6:48 PM Page 7