Filter
Top Products
[ 29 ]THE INTEGRATED ANSWERING DEVICE
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller
hears before your answering system plays the outgoing message. You can
set the ring time to answer after two, four, or six rings. Setting
(Toll Saver), the answering system picks up after two rings if you have
new messages, and after four rings if there are none. This way, if you
make a long distance call to check your messages, you can hang up after
the second ring to avoid billing charges.
1 Press five times.
The current ring time setting is announced ([ ] 2,
[ ] 4, [ ] 6, [ ] Toll saver), and it is displayed
on the base.
2 Press to change the ring time.
3 Press or until the desired ring time appears.
4 Press to select the new ring time.
A confirmation tone sounds, the system announces
the new ring time.
flash/set
flash/set
mute/menu
mute/menu
memo/rec delete
ans. on/off
redial/p memory flash/set
status
mute/menu
memo/rec delete
ans. on/off
redial/p memory flash/set
status
THE INTEGRATED
ANSWERING DEVICE
EXA3955 newstyle 3.3 7/4/1 6:48 PM Page 29