Filter
Top Products
[ 34 ] THE INTEGRATED ANSWERING DEVICE
Recording a conversation
You can record up to a 10 minute conversation while
you are using your phone.
1 During a conversation from the handset, press and
hold at the base. The unit begins recording
and the message counter displays [ ].
A beep, that can be heard by both parties, sounds
during recording.
2 To stop recording, press or .
Remote access away from home
You can operate your answering system from a remote location using any
touch-tone telephone. Use this function to check for recorded messages,
to play or delete messages, even to record a new greeting message.
1 Call your telephone number.
2 During the greeting message, press and enter your PIN code. (See
“Setting a Personal Security Code”, page 27).
3 The answering system announces the number of messages stored in
memory. You hear “To play incoming messages, press pound two. For
help, press pound zero”. You will hear intermittent beeps.
#
memo/rec
memo/rec
• A recorded conversation
is treated as a typical
message and will be
added to the stored
messages.
• Recording conversation
will be terminated if
you press .
flash/set
note
For your convenience a
remote operation card is
provided for you to use
while away from home
(refer to page 47).
tip
If you receive a call waiting tone while recording a
conversation, press to accept the waiting call.
The original caller is put on hold.
flash/set
note
mute/menu
memo/rec delete
ans. on/off
redial/p memory flash/set
status
EXA3955 newstyle 3.3 7/4/1 6:48 PM Page 34